Program operation
Assignment with Data Matrix code
6
83 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
6.16 Assignment with Data Matrix code
You can use a reading device for Data Matrix code to assign C-NET devices to
'Zones' using a layout plan. The adhesive labels of the device are stuck on to the
layout plan. The Data Matrix code on the adhesive labels contains details about the
type and the serial number (ID no.) of the device. Devices can be assigned
manually or automatically.
w
A layout plan with the stuck on adhesive labels with Data Matrix code is
available.
w
A reading device for Data Matrix code is connected to the PC.
w
In the pre-settings, in the 'Assign' view, the 'Use Data Matrix Code reader'
checkbox is activated and the correct port has been selected for the reading
device.
1. Select the 'Detection' task card.
2. In the tree view, select the 'Zone' that you wish to assign to the devices.
3. Open the 'Assign dialog' window.
4. Check the 'Use serial no. ("ID-Nr."):' checkbox.
5. Select the category on the left in the window.
Manual assignment
1. Read-in the Data Matrix code of the desired device on the layout plan.
a
The corresponding device with the physical channel is highlighted on the
right in the window in the 'Hardware tree'.
2. Check the displayed serial number on the upper right in the window.
3. Click on 'Assign'.
a
The device is assigned to the 'Zone'.
Automatic assignment
1. Start automatic assignment. Click the button for automatic assignment next to
the 'Use serial no. ("ID-Nr."):' checkbox.
2. Read-in the Data Matrix code of the desired device on the layout plan.
a
The device is automatically assigned to the 'Zone'.
See also
2
