Software administration
Pre-settings
4
39 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
4.5.3 Commissioning
The following can be set in the 'Commissioning' view:
'Automatic backup embedded configuration': If the checkbox is activated, then the
configuration which is currently saved in the
'Site' will be loaded into the PC and
saved as a backup. This procedure is carried out automatically each time that you
load a configuration from the PC into the 'Station' with the command 'Download
site'.
You will find additional information for the creation of a backup file in document
A6V10210416. See chapter 'Applicable documents'.
See also
2
4.5.4 Assign
The following can be set in the 'Assign' view:
Assign dialog settings
●
'Auto-selection of the type in the Assign dialog': These settings relate to the
behavior in the 'Assign dialog', 'New cause dialog', and 'New effect dialog'
windows. If the checkbox is activated, the first assignable element is found and
displayed in the window automatically. If the checkbox is deactivated, you must
first select a category in the window on the left. Then the first assignable
element of this category is displayed in the window on the right.
●
'Enable display of errors and warnings in the assign dialog tree': If the
checkbox is checked, error messages and warnings are displayed in the
'Assign dialog'.
Data Matrix code reader settings
●
'Use Data Matrix Code reader': If the checkbox is activated, you can use a
reading device to read in the Data Matrix codes on a layout plan. During this
process, the device type and the serial number of the devices are read-in.
●
'Port:': Port for the reading device
The following can be set in the 'Serial communication parameters' category:
●
'Baud rate:': The baud rate specifies the symbols to be transferred per time
unit.
●
'Parity bits:': Type of parity control coding
