Siemens FS720 Series, Configuration

Page: 68 / 412

Program operation
Creating a station with FBP [AU]
6
68 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety 2018-08-29
Creating a 'Station' with an individual address
This function is normally called up when migrating from old systems if a particular
address is to be assigned to a 'Station'.
Once the 'Station' has been created, the address cannot be changed any more.
The maximum value that can be set for the address of the 'Station' is 250.
1. Select 'Edit' > 'New station with address' from the menu bar.
a
The 'New station with address' window opens.
2. Set the desired properties and click on 'Add'.
a
The 'Station' is created with the address entered.
See also
2
Creating networked 'Stations' [ ➙ 312]
6.3 Creating a station with FBP [AU]
l
Proceed as described in chapter 'Creating a station [ ➙ 67]' and select the
'AU FBP - Alarming pre-configured' template.
a
A 'Station' with FBP is created.
a
The PMI with FBP and the operating unit (AU) / 'LED ind./mimic 48 LEDs' are
pre-configured in the 'Operation tree'.
6.4 Create element
You can create an element in the following ways:
● In the 'New element' window
● Via the context menu in the tree view
● In the table
Creating an element in the 'New element' window
w
A ↑ 'Station' has been created.
w
An element is selected for which a sub-element can also be displayed.
w
The ↑ 'Site' element is not selected.