Samsung Ubigate iBG3026, Configuration Manual

Page: 676 / 718

CHAPTER 35. Call Admission Control
634
© SAMSUNG Electronics Co., Ltd.
Ethernet monitoring
detects the status of Ethernet Link Layer, and provides busyout monitoring using
Ethernet link in order to set up/release the busyout according to Down/Up of
Ethernet link, and supports to set up busyout state according to UP/Down.
To place a voice port into the busyout monitor ethernet state, enter the
busyout monitor ethernet command in voice-port configuration mode.
To remove the busyout monitor ethernet state from the voice port, use the no
form of this command.
busyout monitor ethernet interface - number [in-service]
no busyout monitor ethernet interface-number
interface - number Identifies an interface to be monitored for the voice port
busyout function.
in - service( Optional) Configures the voice port to be busied out when any
monitored interface comes into service(its state changes to up). If the keyword
is not entered, the voice port is busied out when all monitored interfaces go
out of service(their state changes to down).
WAN link monitoring
Wan link monitoring detects the links of interfaces configured as WAN and
provides busyout monitoring that used WAN link in order to set up/release
busyout according to down/up of WAN link, and supports to set up/release
busyout state according to Up/Down of WAN link.
To set up busyout monitoring of WAN link, a desired WAN interface should
be in creation in advance.
To place a voice port into the busyout monitor WAN state, enter the
busyout
monitor command in voice-port configuration mode. To remove the busyout
monitor WAN state from the voice port, use the no form of this command.
busyout monitor interface-name interface - number [in-service]
no busyout monitor interface-name interface - number
interface
- name Identifies an interface name to be monitored for the voice port
busyout function.
There are bundle, and loopback that can be used as interface name.