Samsung Ubigate iBG3026, Configuration Manual

Page: 439 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
397
(Continued)
Step Command Purpose
4
[ no ] peer-mon duration <duration
seconds> retry <retry seconds>
Example)
/configure/voip-gateway/sip-ua#
peer-mon duration 200 retry 30
Enables or Disables SIP entity
monitoring feature.
5
exit
Example)
/configure/ voip-gateway/sip-ua# exit
Exits the current mode
6
exit
Example)
/configure/voip-gateway# exit
Exits the current mode
Configuring Miscellaneous Features
This section describes the miscellaneous SIP settings not discussed in the
previous section. These commands are available in SIP UA Configuration
mode and SIP Service Configuration mode. For the information how to use the
commands, see the Command Reference.
Command Mode Purpose
offer call-hold SIP-UA specify globally how the Session Initiation
Protocol(SIP) gateway should initiate call-hold
requests
port SIP-UA Specify the port number per transport to be
used in the Session Initiation Protocol(SIP)
stack by default.
max-forwards SIP-Service Specify the Max-Forwards Header value to
used in the request message.
no-answer-timer SIP-Service Specify the timer value to specify the interval
from the receipt of 1xx response to 2xx
response message.
registrar local-
service expires SIP-Service Specify the allowable expires header value of
a REGISTER message when it runs as a
register in a Survivable telephony mode.
timers SIP-Service Specify the timer value used in Session
Initiation Protocol(SIP) stack.