Samsung Ubigate iBG3026, Configuration Manual

Page: 662 / 718

CHAPTER 34. Extended VoIP Services
620
© SAMSUNG Electronics Co., Ltd.
Configuring Services
Ubigate iBG3026 does not require a user to set up separately for services of
survivable telephony mode. In the Call Manager Interworking mode, it
controls services on the basis of subscriber profiles downloaded from Call
Manager. But, same as in Call Manager Interworking mode, for CLID Service
enable the function that transfers a Caller Id to a FXS phone in FXS voice-port.
How to Configure Voice-Port for CLID
To enable the Caller Id function in FXS voice-port follow the below procedures.
Configuration Steps
−
configure terminal
−
voice-port
−
caller-id enable
−
exit
Detailed Steps
Step
Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration
mode.
2 voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
Enters Voice-Port
configuration mode.
3 [no] caller-id enable [type1 | type2]
Example)
/configure/voice-port(0/1/2)# caller-id
enable type1
Enables or Disables caller-id
feature.
4 Exit
Example)
/configure/voice-port(0/1/2)# exit
Exits the current mode