Samsung Ubigate iBG3026, Configuration Manual

Page: 137 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
99
Configuring RIPv2 authentication
The Ubigate iBG3026 provides RIPv2 authentication and the choice of a
single key or multiple keys for the authentication. This section describes a
simple example to configure RIPv2 authentication with a single key.
In this case, not only the network numbers but also the network interfaces
should be specified for authentication.
The following table shows the steps to enable RIPv2 authentication on a
Ubigate iBG3026 router.
Configuring Step
Step Command Purpose
1 Router# configure terminal Enters the terminal
configuration mode.
2 Router/configure# router rip Enters the RIP setup
mode.
3 Router/configure/router rip# network
[interface]/[number of bit masks] Associates a network to
RIP.
4 Router/configure/router rip# redistribute
connected Enables redistributing from
connected routes.
5 Router/configure/router rip# exit Returns to the upper level
prompt.
6 Router/configure# interface [ interface ] Specify the interface for
authentication
7 Router/configure/interface/[ interface ]# ip
rip
authentication mode {md5 | text}
Selects authentication
mode.
8 Router/configure/interface/[ interface ]# ip
rip
authentication string [
string ]
Specify the authentication
string.
9 Router # show ip protocols rip Displays RIP
configuration.