Samsung Ubigate iBG3026, Configuration Manual

Page: 534 / 718

CHAPTER 31. Digital Voice Port
492
© SAMSUNG Electronics Co., Ltd.
Step Command Purpose
1 show voice card all List all the voice cards installed in the system.
If you find any of the WTE_XX card you can choose
the one to use a E1 trunks card.
v239# show voice card all
SLOT CARD TYPE STATUS VS
VSLOTNAME
[DSP] VoIP_ M510 NORMAL 13
VoIP_VSLOT
[0/0] FXS_ 4M NORMAL 7
MM_2_VSLOT
[0/1] WTE_ 2M NORMAL 6
MM_1_VSLOT
[0/2]- - --
[1/0]- - --
[1/1]- - --
[2/0]- - --
[2/1]- - --
2 show module
configuration all Displays all the digital trunk active in the system.
So if you use this command it helps you to
recognize the carrier-types of the trunks installed in
the system.
v239# show module configuration
all
E1 # Framing Coding ClkSrc
LBO-CableLength State Alarm
----------------------------------
----------------------------------
0/1/1 crc hdb3 int
long haul up N/A
0/1/0 crc hdb3 int
long haul up N/A
3 configure terminal Enter the global configuration mode to advance the
E1 setting.