Samsung Ubigate iBG3026, Configuration Manual

Page: 85 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
49
(Continued)
Step Command Purpose
4 Router/configure/hssi([slot/port])#
clock_source {internal | line} Selects a synchronization clock
source. As a DTE, the option,
‘internal’ , is recommended.
5 Router/configure/hssi([slot/port])#
clock_rate {56,000 to 52,000,000} Selects a clock rate.
6 Router/configure/hssi([slot/port])#
crc {16 | 32} Selects a CRC mode.
7 Router/configure/hssi([slot/port])#
data_mode {normal | inverted} Selects a data mode.
8 Router/configure/hssi([slot/port])#
name {
name string }
Name the interface.
9 Router/configure/hssi([slot/port])#
end Goes back to the ‘ Router# ’ prompt.
10 Router# show module
configuration hssi [slot/port] Show configured information of the
[slot/plort] HSSI interface.
Configuring Example
The following figure illustrates a connection of Ubigate iBG3026 configured
as a DCE.
The following example shows the commands used to configure the connection
in the figure.
Router# configure terminal
Router/configure# module hssi 1/0
Router/configure/hssi (1/0)# mode dce
Router/configure/hssi (1/0)# clock
_
source internal
Router/configure/hssi (1/0)# clock
_
rate 45000000
iBG3026 Router
(HSSI DTE) (HSSI DCE)
HSSI