Samsung Ubigate iBG3026, Configuration Manual

Page: 562 / 718

CHAPTER 31. Digital Voice Port
520
© SAMSUNG Electronics Co., Ltd.
(Continued)
Step Command Purpose
4 exit Exit the module configuration mode
5 show voice port
summary Displays all the voice-port configured in the
system.
Checks out whether the ds0-group just
deleted remains or not.
Configure Basic Trunk Voice Port Parameters
Using the partial setup function of DS0 group configured in digital trunk,
In most cases, if voice port is created for operating voice port function with
the minimum setup, each command is initialized with default value.
Also supports advanced configuration function to support more detailed setup
or additional setup.
Step Command Purpose
1 configure terminal Enter the global configuration mode.
2 voice-port slot/sub-
slot/port:ds0-group-no
Enter the module configuration mode.
3 locale locale Selects a two-letter country name define in
the voice-port mode. It decides call progress
tone parameters and other locale-specific
parameters.
4 compand-type { u-law |
a-law }
Specifies commanding standard used. Even
though values setup here are different, TDM
switch enables conversion.
5 description Optional is the setup-represetative ID for
voice-port, and names text string.
6 exit Exit the voice-port configuration mode.
7 show voice port
slot/sub-slot/port:ds0-
group-no
Checks out if the values set in voice-port are
normally set up.