Samsung Ubigate iBG3026, Configuration Manual

Page: 529 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
487
(Continued)
Step Command Purpose
10 ringing - Specifies the duration that the voice
port allows ringing to continue if a call is not
answered.
The range is from 5 to 60000.
The default is 180.
wait-release - Specifies the duration that a voice
port stays in the call-failure state while the
device sends a busy tone, reorder tone, or an
out-of-service tone to the port.
The range is from 3 to 3600. The default is 30
11 timing digit timer-value specifies the DTMF digit signal duration
12 timing guard-out timer-
value (FXO ports only) specifies the duration in
miliseconds of the guard-out period that prevents
this remote port detects a desconnect signal
13 no shutdown Change shutdown Status of voice-port to in-
Service
14 exit Exits voice port configuration mode
15 dial-peer voice {pots |
voip}
tag
Example)
/configure# dial-peer
voice pots 11
Enters dial-peer configuration mode and defines a
local dial peer that connects to a POTS interface.
The
number argument is one or more digits
identifying the dial peer. Valid entries are from 1
to 10000.
The pots keyword indicates a dial peer using
basic telephone service.
16 destination-pattern
WORD
Example)
/configure# voice-port>
destination-pattern 1004
Setting Destination-pattern
Matches dialed digits to a telephony device.
The
string argument is a series of digits that
specify the E.164 or private dialing plan
telephone number.
Valid entries are the numbers 0 through 9 and
the
letters A through D.
You can also enter the following special characters:
- The asterisk (*) or pound sign (#) on standard
touch-tone dial pads can be used anywhere in
the pattern.