Samsung Ubigate iBG3026, Configuration Manual

Page: 611 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
569
In most cases, it is sufficient in connecting call with the basic value of POTS
dial peer configuration command except the above setup.
To configure POTS dial peer, use the following command starting in global
configuration mode.
Configuration Steps
−
configure terminal
−
dial-peer voice pots <num>
−
destination-pattern <digit-string>
−
port <string>
−
exit
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 dial-peer voice pots num
Example)
sbm/configure# dial-peer
voice pots 10
Enters dial-peer configuration mode and
defines a local dial peer that connects to a
POTS interface.
The number argument is one or more digits
identifying the dial peer. Valid entries are from
1 to 10000.
3 destination-pattern
[+]string[T]
Matches dialed digits to a telephony device.
The
string argument is a series of digits that
specify the E.164 or private dialing plan
telephone number.
Valid entries are the numbers 0 through 9.
You can also enter the following special
characters:
- The asterisk(*) or pound sign(#) on standard
touch-tone dial pads can be used anywhere
in the pattern.
- The period(.) acts as a wildcard character.