Samsung Ubigate iBG3026, Configuration Manual

Page: 491 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
449
(Continued)
Step Command Purpose
3 h225 call-response {alert | progress}
Example)
/configure/voice/service/h323#h225 call-
response progress
Specifies which message to
be send in response to
H.225.0 SETUP message
4 exit
Example)
/configure/voice/service/h323#exit
Exits the current mode
Verifying and Troubleshooting H.323 Features
This section describes how to use the show command and debug command to
verify and troubleshoot the H.323 feature of Ubigate iBG3026.
Using show commands
You can use the show command commands as follows to confirm or see the
current status of the H.323 feature settings.
show h323-gateway service
Shows the H.323 service status. The service status is ‘up’ or ‘down’.
Example)
# show h323-gateway service
H.323 service is up
show h323-gateway status
It shows the information of a server port of H.323 gateway.
Example)
# show h323-gateway status
==========================================================
H.323 Server Port Configuration
==========================================================
H.225.0 Call Signalling Port: 1720
H.225.0 RAS Signalling Port: 1719
H.245 Server Port Range: 32768 – 33023