Samsung Ubigate iBG3026, Configuration Manual

Page: 665 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
623
(Continued)
Step Command Purpose
4 Exit
Example)
/configure/voice-port(0/1/2)# exit
Exits the current mode
How to Configure Voice-Port for CLIDB
To block Caller Id in an originating call of FXS phone, follow the procedures
as below.
Configuration Steps
−
configure terminal
−
voice-port
−
caller-id block
−
exit
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration
mode.
2 voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
Enters Voice-Port
configuration mode.
3 [no] caller-id block
Example)
/configure/voice-port(0/1/2)# caller-id block
Block or re-enable the caller
id of the calls made from
this port.
4 Exit
Example)
/configure/voice-port(0/1/2)# exit
Exits the current mode
How to Configure for Call Hold
The Call Hold and Retrieve service is available for all FXS subscribers by
default. There is no way to enable or disable.