Samsung Ubigate iBG3026, Configuration Manual

Page: 586 / 718

CHAPTER 32. ISDN
544
© SAMSUNG Electronics Co., Ltd.
Delete the ISDN
To delete the ISDN, use the following command
Step Command Purpose
1 configure terminal Configures to set up bundle.
2 voice-port 0/0/0:D Configures to set up voice-port.
3 shutdown Shutdown voice port..
4 No interface bundle
bundleName
Delete interface bundle
Configuring ISDN Calling Number Identification
A router with an ISDN BRI interface might need to supply the ISDN network
with a billing number for outgoing calls. Some networks offer better pricing
on calls in which the number is presented. When configured, this information
is included in the outgoing call Setup message. To configure the interface to
identify the billing number, use the following command in interface
configuration mode:
Step Command Purpose
1 configure terminal Configures to set up bundle.
2 Interface bundle
bundle-name
Sets up bundle name.
3 Link bri 0/0/0:1 Sets up the pertinent physical link.
4 isdn Sets up ISDN
5 Switch-type switch-type Sets up the pertinent switch-type with the
content like the following table.
6 Incoming-voice Sets up for voice.
7 Calling-number calling-
number
Specifies the calling party number
8 activate Activates ISDN.
9 exit -
10 Voice-port 0/0/0:D Configure to set up voice port
11 No shutdown Turns on the port.