Samsung Ubigate iBG3026, Configuration Manual

Page: 35 / 718

Ubigate iBG3026 Configuration Guide
© SAMSUNG Electronics Co., Ltd.
1
CHAPTER 1. Basic Configuration
This chapter describes the initial configuration steps and command-line interface basics.
This chapter describes the initial configuration steps and command-line
interface(CLI) basics.
This section describes the initial steps to configure the Ubigate iBG3026.
Logging in
After the Ubigate iBG3026 being powered-on, the login sequence should be
followed as in the figure.
login: samsung
password: samsung
samsung logged in on Fri May 7 05:28:01 2004 from console
Router#
Changing Login Parameters
The System Administrator login consists of two components: the account name
and the password. The initial login name is always
samsung , but you can change
this to suit the needs of your facility after logging in. The default administrative
password,
samsung , should be changed as soon as possible to ensure only
authorized access to the system. For more information about command usage, see
the Ubigate iBG3026
TM
Router Command Reference Guide. This guide is
available on the Samsung website: http://www.samsung.com./