Samsung Ubigate iBG3026, Configuration Manual

Page: 99 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
63
PPP and MLPPP Configuration
This section shows how to configure interfaces with PPP and MLPPP.
Configuring MLPPP for Ubigate iBG3026 at Main Site
Configuring Step
Step Command Purpose
1 Router# configure terminal Goes into the terminal
configuration mode.
2 Router/configure# interface bundle
[
bundle name ]
Sets a bundle interface. ‘bundle
name’ represents a specific
bundle interface to be configured
at the moment.
3 Router/configure/bundle/[bundle
name]# link ct3
[
slot/port/channel(s) ]
Links a channelized T3 interface
to a wan interface
4 Router/configure/bundle/[bundle
name]# encapsulation ppp Selects PPP as an encapsulation
method.
5 Router/configure/bundle/[bundle
name]# mlppp seg_threshold
[
64~4500 ]
differenctial_delay [ 0~128 ]
Selects PPP as an encapsulation
method.
6 Router/configure/bundle/[bundle
name]# ip address [
IP address ]
{ [ bit mask ] | [ number of bits for
mask ] }
Sets an IP address for the
interface.
7 Router/configure/bundle/[bundle
name]# exit Returns to the upper
configuration mode.
8 Router/configure# interface bundle
[
bundle name ]
Sets a bundle interface. ‘bundle
name’ represents a specific
bundle interface to be configured
at the moment.
9 Router/configure/bundle/[bundle
name]# link ct3
[
slot/port/channel(s) ]
Links a channelized T3 interface
to a wan interface
10 Router/configure/bundle/[bundle
name]# encapsulation ppp Selects PPP as an encapsulation
method.