Samsung Ubigate iBG3026, Configuration Manual

Page: 464 / 718

CHAPTER 29. H.323 Gateway Management
422
© SAMSUNG Electronics Co., Ltd.
Table 29.5 H.323 Call Statistics Command
Command Description
show h323-gateway h225 Accumulated data per H.225.0 CS message
transceived by H.323 gateway after Ubigate
iBG3026 is booted.
show h323-gateway h245 Accumulated data per H.245 message
transceived by H.323 gateway after Ubigate
iBG3026 is booted.
show h323-gateway ras Accumulated data per H.225.0 RAS message
transceived by H.323 gateway after Ubigate
iBG3026 is booted.
show h323-gateway release-
cause Accumulated data per cause of H.225.0
ReleaseComplete message transceived by H.323
gateway after Ubigate iBG3026 is booted.
To trace and debug the H.323 call in progress, the command described in
Table 29.6 should be entered in a privileged EXEC mode.
Table 29.6 H.323 Call Tracing & Debug Command
Command Description
debug h323 stack [ h225 | h245
| ras | all ] Shows the ASN.1 information and the encoded
messages of the following messages in
hexadecimal number.
- h225: H.225.0 Call Signalling Message
- h245: H.245 Message
- ras: H.225.0 RAS Message
debug h323 vcc [ in | out | all ]
[ deb0 | deb1 | deb2 | info | all ] For the H.323 calls in progress, the following
information is displayed.
- deb0: H.323 Message send and received
- deb1: Internal Call Control Message and Call
State transition information
- deb2: detailed message processing information
- info: not used