Samsung Ubigate iBG3026, Configuration Manual, Page: 594 / 718

CHAPTER 32. ISDN
552
© SAMSUNG Electronics Co., Ltd.
Configuring the ISDN PRI Switch
To configure the switch type, use the following command.
Step Command Purpose
1 configure terminal Configures to set up bundle.
2 Interface bundle
bundle-name
Sets up bundle name.
3 Link [pri_e1|pri_t1]
0/0/0:1
Sets up the pertinent physical
link.(slot/subslot/port:*timeslots)
4 Isdn Sets up ISDN
5 Switch-type switch-type Sets up the pertinent switch-type with the
content like the following table 36.2.
*timeslots: E1 PRI is 1 to 31, T1 PRI is 1 to 24.
Table 32.2 switch-type parameter description (PRI)
Switch Type Keywords Description
Primary-4ess AT & T Primary Rate Switch Type
Primary-5ess AT & T Primary Rate Switch Type(default)
Primary-dms250 DMS250 Primary Rate Switch Type
Primary-dms100 DMS100 Primary Rate Switch Type
Primary-ntt NTT Primary Rate Switch Type
Primary-qsig Q Signaling Primary Rate Switch Type(only
user(slave) side)
Primary-ni2 National ISDN 2 Primary Rate Switch Type
Primary-euro Euro ISDN Primary Rate Switch Type
Primary-ccitt CCITT/ITU-T Primary Rate Switch Type
Configuring Voice type
To configure the voice type, use the following command.
Step Command Purpose
1 configure terminal Configures to set up bundle.
2 Interface bundle
bundle-name
Sets up bundle name.