Samsung Ubigate iBG3026, Configuration Manual

Page: 561 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
519
Trunk Voice port Management
This section describes management of logical voice ports configured in digital
E1 trunk.
create a DS0 group
delete a DS0 group
configure DS0 group
Create Trunk Voce Port
It manages with ds0 group by logically combining DS0 channel, which
belongs to digital trunk. The following describes the procedure to create the
DS0 group.
Step Command Purpose
1 configure terminal Enter the global configuration mode
2 module t1 slot/sub-
slot/port
Select trunk to create DS0 group.
3 cas-ds0-group ds0-
group-no
ds0-group-no: Identifies the unique DS0
group(number from 0 to 23, for T1, or from 0 to
30, for E1) in a specific trunk.
4 exit Exit the module configuration mode
5 show voice port
summary Displays all the voice-port configured in the
system.
Checks out whether the ds0-group just created
exists or not.
Delete Trunk Voice Port
It is a function to delete DS0 group created in a specific digital trunk.
The following describes the procedure to delete DS0 group.
Step Command Purpose
1 configure terminal Enter the global configuration mode
2 module e1 slot/sub-
slot/port
Select trunk to delete DS0 group.
3 no cas-ds0-group ds0-
group-no
ds0-group-no: Identifies the unique DS0
group(number from 0 to 23, for T1, or from 0 to
30, for E1) in a specific trunk.