Samsung Ubigate iBG3026, Configuration Manual

Page: 527 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
485
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 voice-port
slot/subslot/port
Enter voice port Configuration Mode
slot - Specifies the number of the router slot
where the voice module in installed
subslot - Specifies the number of subslot in the slot
port - Indicates the voice port
3 shutdown Change status of voice port to shutdown
4 ani mapping 0-3 digits
for example:
ani mapping 0 415
0= 415, 1=510, 2=650,
3=916
05551234 = (415) 555-
1234, 15551234 = (510)
555-1234, and so on.
NPD range is from 0 to 3 To preprogram the Numbering Plan Area(NPA),
or area code, into a single Multi Frequency(MF)
digit.
5 signal
{groundstart | loopstart}
signal {cama {kp-0-nxx-
xxxx-st | kp-0-npa-nxx-
xxxx-st | kp-2-st | kp-npd-
nxx-xxxx-st}
Selects the access signaling type to match that
of the telephony connection you are making.
The keywords are as follows:
loop-start - (default) Uses a closed circuit to
indicate off-hook status; used for residential loops.
ground-start - Uses ground and current
detectors; preferred for PBXs and trunks
kp-0-npa-nxx-xxxx-st 10-digit transmission.
The E.164 number is fully transmitted.
kp-0-nxx-xxxx-st 7-digit automatic number
identification(ANI) transmission. The Numbering
Plan Area(NPA) or area code is implied by the
trunk group and is not transmitted.