Samsung Ubigate iBG3026, Configuration Manual

Page: 504 / 718

CHAPTER 30. Analog Voice Port
462
© SAMSUNG Electronics Co., Ltd.
(Continued)
Step Command Purpose
3 shutdown Change status of voice port to shutdown
4 signal {loop -start| ground-start} Selects the access signaling type to
match that of the telephony connection
you are making. The keywords are as
follows:
loop-start - (default) Uses a closed circuit
to indicate off-hook status; used for
residential loops.
ground-start - Uses ground and current
detectors; preferred for PBXs and trunks
5 ring frequency {20 | 25| 30| 50 } Selects ring frequency
20 Hz frequency
25 Hz frequency
30 Hz frequency
50 Hz frequency
6 ring cadence on-net
{
cadence|define pulse interval
pulse interval pulse interval}
Changes Ring Cadence for on-net Call
7 ring cadence off-net
{
cadence|define pulse interval
pulse interval pulse interval}
Changres Ring Cadence for off-net Call
8 locale locale Selects the two-letter locale for the voice
call progress tones and other locale-
specific parameters to be used on this
voice port
The Default is us
ex) locale us
9 timeouts timer-name timer-value To change timeouts parameters
initial - Sets the number of seconds that
the system waits between the caller input
of the initial digit and the subsequent digit
of dialed string.
A valid entry is from 0 to 120. The default
is 10