Samsung Ubigate iBG3026, Configuration Manual

Page: 699 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
657
Especially set up log commands when displaying debug Message of a specific port.
Table 36.11 Voice Call Control Debug
Command Purpose
Debug vcc ascc Analog Signal Call Control debug
Debug vcc ccac CCAC debug
Debug vcc iscc ISDN Call Control Debug
Debug vcc tkcc Trunk Call Control Debug
Debug vcc log Use a specific port when debugging
Voice Protocol Module debug mode
This is the function that shows debug messages of the layer close by a device
on ports side.
There are parameters of in/out/all that set up Incoming/Outgoing, and
deb0/deb1/info/all that set up levels.
Table 36.12 Voice Protocol Module Debug
Command Purpose
Debug vpm asi Analog Sub Interface debug
Debug vpm ati Analog Trunk Interface debug
Debug vpm dti Digital Trunk Interface debug
Debug vpm ssi Signal Interface
H323 debug mode
This is the function that shows a debug message of H323, and shows the
contents of stack and call-control.
Log displays an appropriate calling number and called number, All displays a
debug message regardless of calling/called number.
Table 36.13 H323 Debug
Command Purpose
Debug h323 stack h323 stack related command
Debug h323 vcc h323 Voice Call Control related command
Debug h323 log h323 calling or called number log related
command