Samsung Ubigate iBG3026, Configuration Manual, Page: 613 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
571
(Continued)
Command Purpose
max-call num
Example)
sbm/configure/…/pots
num # max-
call 10
(Optional) Specifies the maximum number of
allowed connections to and from the POTS dial
peer. The valid range is 1 through 256.
preference num
Example)
sbm/configure.../pots
num #
preference 1
(Optional) Configures a preference for the
POTS dial peer. The valid range is 0 through
10, where the lower the number, the higher the
preference.
prefix num
Example)
sbm/configure.../pots
num # prefix
string
(Optional) Includes a prefix that the system
adds automatically to the front of the dial string
before passing it to the telephony interface.
Valid entries for the
string argument are 0
through 9.
Configuring VoIP Dial Peers
VoIP dial peer makes possible call with the particular Ubigate iBG3026
telephony device.
To set VoIP dial peer, the followings should be done.
Assign dial peer with the tag number only.
Define termination telephone number.
Define termination ip-address.
Like POTS dial peer, it is sufficient in making call with default value of other
cli in most environment.
To configure VoIP dial peer, use the following command starting in global
configuration mode.
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.