Samsung Ubigate iBG3026, Configuration Manual

Page: 516 / 718

CHAPTER 30. Analog Voice Port
474
© SAMSUNG Electronics Co., Ltd.
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 voice-port slot/subslot/port Enter voice port Configuration Mode
slot - Specifies the number of the router
slot where the voice module in installed
subslot - Specifies the number of subslot
in the slot
port - Indicates the voice port
3 shutdown Change status of voice port to shutdown
4 signal { wink-start |
immediate-start | delay-dial }
This command enables Direct Inward
Dialing on the voice port
immediate - if the voice port must use the
immediate start protocol
wink-start - if the voice port must use the
wink-start protocol
delay-dial - if the voice port must use the
delay start protocol
5 operation {2-wire | 4-wire} Specifies the number of wires used for
voice transmission at this interface(the
audio path only, not the signaling path)
6 dial-type {dtmf|mf} Specifies the dialing method for outgoing calls
7 locale locale Selects the two-letter locale for the voice
call progress tones and other locale-
specific parameters to be used on this
voice port
The Default is us
ex) locale us