Samsung Ubigate iBG3026, Configuration Manual

Page: 291 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
251
The peer of a local WAN interface cannot be used as a tunnel
destination.
4.
Verify that the tunnel is up and running.(If it is not, check the Gateway
and Source Address fields.)
Router# show ip interfaces
...
t0(unit number 5)
Type: TUNNEL
Flags:(0x74243) UP, RUNNING, MULTICAST-ROUTE
Internet Address: 103.1.1.2
Internet Netmask: 255.255.255.0
Internet Broadcast: 103.1.1.255
Maximum Transfer Unit: 1476 bytes
Source Address: 192.168.94.220
Destination Address: 192.168.55.75
Gateway: wan1
Protocol: GRE
Mac Address 00:50:52:60:00:00
...
For more information enter:
Router# show interface tunnel t0
Tunnel: t0
Status: up
Internet Address: 103.1.1.2 Internet Netmask: 255.255.255.0
Source Address: 192.168.94.220 Destination Address: 192.168.55.75
MTU: 1476 bytes
Protocol: GRE
ICMP unreachable: will be sent ICMP redirect: will be sent
Crypto type: not set
IPSEC/IKE: policy not set key not
set
TTL: 30
Keepalive: disabled
TOS: not set Path MTU discovery: disabled
Key Value: not set Checksum: disabled
Sequence Datagrams: disabled
Tunnel Statistics:
Bytes Rx
0 Bytes Tx 0
Packets Rx 0 Packets Tx 0
Err Packets Rx 0 Output Errs 0