Samsung Ubigate iBG3026, Configuration Manual, Page: 499 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
457
Wink-Start Method
Wink-start is most used E & M Access method, and default signaling of voice
port. Wink-start method hooks off E-lead to enter ‘seizure’ action, and then
receives ‘Wink’ of M-lead on the counterpart office, and transmits address
information.
Figure 30.5 wink method signaling sequence
Delay-Dial Method
Delay-dial method enters ‘seizure’ action by hooking off E-lead from the
calling side, after a given time, about 200msec, when the calling side takes a
look at the status of terminating side, if the terminating side is on hook status
(or he/she awaits till the terminating side enters into on-hook status), calling
side sends address information.
Originating Destination
M-wire E-wire M-wire E-wire
seizure
digits
digits
answer
Min 70 msec
Max 10 sec
Min 200 msec
Min 120 msec
Max 6 sec
Pulse=200 msec
answer