Samsung Ubigate iBG3026, Configuration Manual

Page: 39 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
5
Syntax Help
The CLI can complete the spelling of command or parameter keywords. Begin
typing the command or parameter then press TAB. At the CLI command
prompt type
sh
:
Router# sh
Press TAB. The CLI shows:
Router# show
If the command or parameter partial spelling is ambiguous, the CLI displays
the choices that match the abbreviation. Type
show i
. Press TAB. The CLI
shows:
Router# show interface
The interface displays ‘show interface’ and Type TAB once again then it
displays another parameter ‘show ip.’ Any available paramters can be fetched
by typing TAB.
Type ? and the CLI shows the list of parameters for the show interface
command.
Router# show interface ?
avc display information about an
DTE-to-DTE MFR avc
Bundle display information about a bundle
Bundles display all the names of bundles
Configured in the system
Ethernet display an ethernet interface
Ethernets display all ethernet interfaces
l2tp-server display l2tp-server interface(s)
loopback display loopback interface(s)
switchport Display the modes of the Layer2 interfaces
tunnel display a tunnel interface
tunnels display all tunnel interfaces
virtual-access display virtual access interface(s)