Samsung Ubigate iBG3026, Configuration Manual, Page: 482 / 718

CHAPTER 29. H.323 Gateway Management
440
© SAMSUNG Electronics Co., Ltd.
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 voice service h323
Example)
/configure# voice service h323
Enters ‘voice service h323’ configuration
mode.
3 ras rrq-ttl time-to-live
Example)
/configure/voice/service/h323#r
as rrq-ttl 60
Sets time-to-live parameter. Argument is
as follows:
-
time-to-live:How long, in seconds, the
gatekeeper considers the gateway
active.
Range: 15 to 300
5 exit
Example)
/configure/voice/service/h323#
exit
Exits the current mode
Configuring Multiple Codecs
When a single dial-peer is set, only a single codec can be specified.
This, however, decreases the possibility of call establishment. Therefore, this
section describes how to set a list of codecs having priority to increase the call
establishment possibility between H.323 endpoints in an H.245 capability
exchange stage.
You can set multiple codecs in a single dial-peer in the following way.
Configuration Steps
−
configure terminal
−
voice class codec
−
codec-preference
−
exit
−
dial-peer voice voip
−
voice-class codec
−
exit