Samsung Ubigate iBG3026, Configuration Manual

Page: 83 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
47
Configuring HSSI
The primary use of HSSI is for WAN interfaces such as T3(45 Mbps), and OC-1
(52 Mbps) of the synchronous digital hierarchy. The HSSI interface can be
configured as a DTE or a DCE. Each way to configure HSSI interface is shown
in the following.
Configuring HSSI as a DTE
Configuring Step
Step Command Purpose
1 Router# configure terminal Enters the terminal configuration
mode.
2 Router/configure# module hssi
[slot /port] Selects a port to configure as a
HSSI module. [slot/port] denotes a
specified port in a specified slot.
3 Router/configure/hssi([slot/port])#
mode dte Selects a HSSI mode as a DTE.
4 Router/configure/hssi([slot/port])#
clock_source {internal | line} Selects a synchronization clock
source. As a DTE, the option,
‘line’ ,
is recommended.
5 Router/configure/hssi([slot/port])#
clock_rate {56,000 to 52,000,000} Selects a clock rate.
6 Router/configure/hssi([slot/port])#
crc {16 | 32} Selects a CRC mode.
7 Router/configure/hssi([slot/port])#
data_mode {normal | inverted} Selects a data mode.
8 Router/configure/hssi([slot/port])#
name {
name string }
Name the interface.
9 Router/configure/hssi([slot/port])#
end Returns to the ‘ Router# ’ prompt.
10 Router# show module
configuration hssi [slot/port] Show configured information of the
[slot/plort] HSSI interface.