Samsung Ubigate iBG3026, Configuration Manual

Page: 79 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
43
Bundle Configuration
This section describes how to configure a bundle interface. The interface
bundle specifies the physical connection to be linked, an encapsulation
protocol(Layer 2) and, optionally, Layer 3 parameters.
Configuring a HSSI frame relay bundle
The following example creates a simple interface bundle utilizing the HSSI
interface and Frame Relay(Layer 2) parameters.
Configuring Step
Step Command Purpose
1 Router# configure terminal Enters the terminal
configuration mode.
2 Router/configure# interface bundle
[bundle name]
Sets a bundle interface. ‘bundle
name’ represents a specific
bundle interface to be
configured at the moment.
3 Router/configure/interface/bundle
[bundle name]# link hssi 1/0 Links a HSSI interface to a wan
interface
4 Router/configure/interface/bundle
[bundle name]# encapsulation frelay Selects Frame Relay as an
encapsulation method.
5 Router/configure/interface/bundle
[bundle name # fr Enters the frame relay prompt
for setting frame relay
parameters.
6 Router/configure/interface/bundle
[bundle name /fr# Selects a clock rate.
7 Router/configure/interface/bundle
[bundle name /fr# pvc [channel number] Sets a PVC channel number.
Channel range: 16 to 1022.
8 Router/configure/interface/bundle
[bundle name]/fr/pvc [channel number]#
ip address [
IP address ] { [ bit mask ] |
[ number of bits for mask ] }
Sets an IP address for the
PVC.
9 Router/configure/interface/bundle
[bundle name /fr/pvc [channel
number]# end Returns to the ‘ Router# ’
prompt.
10 Router# show interface {bundle
[bundle name] | bundles} Shows configured information
of the bundle interface or all
bundle interfaces.