Samsung Ubigate iBG3026, Configuration Manual

Page: 242 / 718

CHAPTER 19. QoS
204
© SAMSUNG Electronics Co., Ltd.
L2 Bridge Based CoS Marking
The first stage that assigns CoS attributes is the Bridge processing stage.
To configure the bridge port TC assignment, enter:
Router/configure/interface/ethernet (3/0)/qos# [no]
override-outq <queue-id(1..8)>
Using the
no form will switch off TC override. When TC override is ‘off’, the
TC gets reassigned based on the UP of the packet in the next stage.
UP-based TC assignment uses the UP attribute of the packet(if tagged) to
assign the TC attribute.
To configure the associated table, enter:
Router/configure/qos# [no] map-up-to-outq [<UP(0..7)>
<TC(1..8)>]
Using the
no form will reset a specific row to default UP-based DP
assignment uses the UP attribute of the packet to assign the DP attribute.
The associated table can be configured using the following command
Router/configure/qos# [no] map-up-to-dp [<UP(0..7)>
<DP(0..2)>]
Using the
no form will reset a specific row to default TC-based UP
assignment uses the TC attribute of the packet to assign the UP attribute, if the
packet is untagged.
To configure the associated table, enter:
Router/configure/qos# [no] map-outq-to-up [<TC(1..8)>
<UP(0..2)>]
Using the
no form will reset a specific row to default.