Samsung Ubigate iBG3026, Configuration Manual

Page: 505 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
463
(Continued)
Step Command Purpose
9 interdigit - Configures the number of
seconds that the system waits after the
caller has input the initial digit or a
subsequent digit of the dialed string. If the
timeout ends before the Destination is
identified, a tone
sounds and the call ends. This value is
important when using variable-length dial
peer destination patterns(dial plans).
The
seconds argument is the
interdigit timeout wait time in seconds.
A valid entry is an integer from 0 to 120.
The default is 5.
ringing - Specifies the duration that the
voice port allows ringing to continue if a
call is not answered.
The range is from 0 to 60000.
The default is 180. 0 means infinity.
wait-release - Specifies the duration that a
voice port stays in the call-failure state
while the device sends a busy tone,
reorder tone, or an out-of-service tone to
the port.
The range is from 0 to 3600. The default
is 30. 0 means infinity.
10 timing hookflash-out timer-value the duration of the hookflash, in
miliseconds
11 no shutdown Change shutdown Status of voice-port to
in-Service
12 exit Exits voice port configuration mode