Samsung Ubigate iBG3026, Configuration Manual

Page: 506 / 718

CHAPTER 30. Analog Voice Port
464
© SAMSUNG Electronics Co., Ltd.
(Continued)
Step Command Purpose
13 dial-peer voice {pots | voip} tag
Example)
/configure# dial-peer voice pots
11
Enters dial-peer configuration mode and
defines a local dial peer that connects to
a POTS interface.
The
number argument is one or more digits
identifying the dial peer. Valid entries are
from 1 to 10000.
The pots keyword indicates a dial peer
using basic
telephone service.
14 destination-pattern WORD
Example)
/configure# voice-port>
destination-pattern 1004
Setting Destination-pattern
Matches dialed digits to a telephony
device.
The
string argument is a series of digits
that specify the E.164 or private dialing
plan telephone number.
Valid entries are the numbers 0 through 9
and the
letters A through D.
You can also enter the following special
characters:
- The asterisk(*) or pound sign (#) on
standard touch-tone dial pads can be
used anywhere in the pattern.
- The period (.) acts as a wildcard character.
When the timer(T) character is included
at the end of the destination pattern, the
router collects dialed digits until the
interdigit timer expires(5 seconds, by
default) or until you dial the termination
character(the default is #). The timer
character must be a capital T.
15 port slot/subslot/port Maps the dial peer to a specific Port Number
16 exit Exits voice dial-peer configuration mode