Samsung Ubigate iBG3026, Configuration Manual

Page: 40 / 718

CHAPTER 1. Basic Configuration
6
© SAMSUNG Electronics Co., Ltd.
This command has but one positional parameter, an interface name. Supply a
value for the parameter.
Command line errors
If the router does not recognize the command after ENTER is pressed, it
displays this message:
Router# command-unknown
^
Error : Command 'command-unknown' does not exist
Some commands are too long for the display line and can wrap in mid-
parameter or mid-keyword if necessary:
area 10.10.0.18 virtual-link 10.10.0.19 authentication-key
57393
Configuration File Operation
By using the configure flash command, you can set the Router system
parameters from a configuration file stored in the flash memory. This method
is useful if the system configuration differs from the configuration file in flash
memory and you want to restore the flash configuration. It is recommended
that all configuration files have a. CFG extension.
At the main CLI prompt, type configure flash and press Return. Then, type the
desired configuration file name(with a .cfg extension) and press Return, as
shown in the example below.
Router# configure flash
filename(path): test.cfg
The system configuration can be saved in a file as shown in the following
example.
Router# save local