Samsung Ubigate iBG3026, Configuration Manual

Page: 520 / 718

CHAPTER 30. Analog Voice Port
478
© SAMSUNG Electronics Co., Ltd.
Delay Dial
The originating end seizes the line and waits 200 ms to see if the far end is
on-hook. If so, the originating end then outpulses digits. If the far end is
off-hook, the originating end waits until the far end is on-hook before
outpulsing digits.
Restrictions of DID Trunk
Dial Tone is not present
Outgoing Calls are not allowed. If an outgoing call is attempted, the caller
will get a fast busy signal
How to Configure Analog DID
To set up each parameter of basic analog voice port, follow the next procedures.
Configuration Steps
−
configure terminal
−
voice-port
−
dial-peer voice pots
−
exit
Detailed Steps
Step Command Purpose
1 configure terminal
Example)
# configure terminal
Enters global configuration mode.
2 voice-port slot/subslot/port Enter voice port Configuration Mode
slot - Specifies the number of the
router slot where the voice module in
installed
subslot - Specifies the number of
subslot in the slot
port - Indicates the voice port