Samsung Ubigate iBG3026, Configuration Manual

Page: 612 / 718

CHAPTER 33. Routing and Digit Manipulation
570
© SAMSUNG Electronics Co., Ltd.
(Continued)
Step Command Purpose
3 Example)
sbm/configure/…/pots num #
destination-pattern
0234389…
When the timer(T) character is included at
the end of the destination pattern, the router
collects dialed
digits until the interdigit timer expires
(5 seconds, by default) or until you dial the
termination character(the default is #).
The timer character must be a capital T.
4 port string
Example)
sbm/configure/…/pots
num #
port 0/0/1
Maps the dial peer to a specific logical
interface.
The
port command syntax is platform-
specific.
Configuring Dial Plan Options for POTS Dial Peers
When dial plan is configured, the different option value should be possessed
depending on how dial plan is confugred.
To configure optional feature about POTS dial peer, see the following
command.
Command Purpose
incoming-called-number
Example)
sbm/configure/…/pots
num #
incoming-called-number 3438….
(Optional) Selects the inbound dial peer
based on the called number.
direct-inward-dial
Example)
sbm/configure/…/pots
num # direct-
inward-dial
(Optional) Enables the Direct Inward
Dialing(DID) call reatment for the incoming
called number.
forward-digit {all | default | extra |
num
num }
Example)
sbm/configure/…/pots num#
forward-digit all
(Optional) Configures the digit-forwarding
method used by the dial peer. The valid range
for the number of digits forwarded(
num-digit )
is 0 through 32.