Samsung Ubigate iBG3026, Configuration Manual

Page: 584 / 718

CHAPTER 32. ISDN
542
© SAMSUNG Electronics Co., Ltd.
Configuring Voice type
To configure the voice type, use the following command.
Step Command Purpose
1 configure terminal Configures to set up bundle.
2 Interface bundle
bundle-name
Sets up bundle name.
3 Link bri 0/0/0:1 Sets up the pertinent physical link.
4 Isdn Sets up ISDN
5 Switch-type switch-type Sets up the pertinent switch-type with the
content like the following table.
6 Incoming-voice Sets up for voice.
7 spid1 spid-number (Optional: TE Only) Spefies a service profile
identifier for B1 channel. Currently, only the
DMS-100 and NI switch types require SPIDs.
8 spid2 spid-number (Optional: TE only) Specifies a SPID for B2
channel.
9 sending-alerting (Optional) Specify if Alerting message to be sent
out before Connect message.
10 overlap-receiving (Optional) Specify if the interface will do Overlap
Receiving.
11 tei-mode [point-to-
point|point-to-
multipoint] (Optional) Configure the type of tei negotiation
12 tei-vale num (Optional) Configure the tei value for Point-to-
Point tei mode.