Command Reference
R&S
®
ZNA
780
User Manual 1178.6462.02 ─ 12
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Prior to enabling user-defined jitter, the jitter values must have been loaded from file
using
.
Note that jitter will not be applied unless the jitter functionality is activated using
CALCulate<Chn>:EYE:JITTer:STATe
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Boolean>
*RST:
OFF
Options:
R&S
ZNA-K20
Manual operation:
See
CALCulate<Chn>:EYE:MASK AUTO
Automatically creates an eye mask, based on the current eye measurement settings.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Usage:
Setting only
Manual operation:
See
CALCulate<Chn>:EYE:MASK:CENTer:HORizontal
<HorizontalOffset>
Defines the horizontal center of the eye mask in the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<HorizontalOffset>
Horizontal offset relative to the middle of the eye diagram
Default unit: s
Options:
R&S
ZNA-K20
Manual operation:
See
CALCulate<Chn>:EYE:MASK:CENTer:VERTical
<VerticalOffset>
Defines the vertical center of the eye mask in the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
SCPI Command Reference
