Rohde & Schwarz 1332.4500.22, User Manual

Page: 244 / 1476

GUI Reference
R&S
®
ZNA
244 User Manual 1178.6462.02 ─ 12
"Meas" softtool tab Channel Mode Required Software Option
Chapter 6.5.5, "Time Domain
Tab"
, on page 330
Time Domain Analysis R&S ZNA-K4 and -K2
Spectrum Tab Spectrum Analyzer Mode R&S ZNA-K4 and -K1
6.2.2 S-Params Tab
The "S-Params" tab gives access to measurements that are typically used to charac-
terize passive, non-frequency converting DUTs. S-parameters are the basic measured
quantities of a network analyzer. They describe how the DUT modifies a signal that is
transmitted or reflected in forward or reverse direction. S-parameters, and similarly Y-
and Z-parameters, fully characterize a linear DUT.
Background information
Refer to:
●
Chapter 5.3.1, "S-Parameters" , on page 101
●
Chapter 5.3.3, "Impedance Parameters" , on page 106
●
Chapter 5.3.3.1, "Converted Impedances" , on page 106
●
Chapter 5.3.3.2, "Z-Parameters" , on page 108
●
Chapter 5.3.4, "Admittance Parameters" , on page 109
●
Chapter 5.3.4.1, "Converted Admittances" , on page 109
●
Chapter 5.3.4.2, "Y-Parameters" , on page 109
●
Chapter 5.3.6.3, "Imbalance and Common Mode Rejection" , on page 116
●
Chapter 5.3.7, "Stability Factors" , on page 118
6.2.2.1 Controls on the S-Params Tab
The appearance of the "S-Params" tab depends on whether the R&S ZNA is equipped
with the Frequency Conversion Measurements option R&S ZNA-K4.
Meas Softtool