Rohde & Schwarz 1332.4500.22, User Manual

Page: 470 / 1476

GUI Reference
R&S
®
ZNA
470 User Manual 1178.6462.02 ─ 12
Tap the Add + Modify button to open the Calibration Setup Dialog , which allows you to
add calibration definitions or modify them. Existing definitions can be selectively
deleted .
Use the checkboxes in the "Enable" column to enable/disable the related calibration
definition. Use the ellipsis button in the "Channels" column to assign the related cali-
bration definition (also) to other channels.
Add + Modify
Opens the Calibration Setup Dialog that allows you to add calibration definitions and
modify existing ones.
Delete
Deletes the calibration definition that is selected in the "Calibration definition table"
on page 469.
Port table
The table in the lower half of the dialog displays the port configuration of the item
selected in the row in the
Calibration definition table :
●
For an automatic calibration (left), it displays the port assignment.
●
For a manual calibration (right), it displays the ports with their connector, gender
and cal kit.
For a given port, these values are shared among the related manual channel cali-
bration definitions.
The buttons "Same Connector all Ports", "Same Gender all Ports" and "Import Cal
Kit..." provide the functionality known from the
Calibration Setup Dialog .
Start Cal
Saves the calibration definitions to the current setup. Then enters the Calibration Wiz-
ard to acquire data for all involved channels, ports and standards.
Note: In the current implementation, "Start Cal" is disabled if both manual and auto-
matic calibration definitions are enabled in the Calibration definition table .
Cal Softtool