Rohde & Schwarz 1332.4500.22, User Manual

Page: 287 / 1476

GUI Reference
R&S
®
ZNA
287 User Manual 1178.6462.02 ─ 12
Access: Trace – [Meas] > "S-Params" mode > "External DLL"
6.2.12.1 Controls on the External DLL Tab
Initially, only the "Configuration / Perm. Settings" on page 287 button is available on
the "External DLL" tab.
Each external DLL
<ext_dll_name>.dll
that provides at least one custom trace
type, adds a button "<ext_dll_name>" to the "Measurement" section of the "External
DLL" tab. If no external DLL is installed, the "Measurement" section is hidden.
Configuration / Perm. Settings
Opens the External DLL Configuration Dialog .
Measurement
The "Measurement" section gives access to the custom traces of the loaded plug-ins.
Each external DLL
<ext_dll_name>.dll
that provides at least one custom trace
type, adds a button "<ext_dll_name>" to the "Measurement" section of the "External
DLL" tab. If no external DLL is installed, the "Measurement" section is hidden.
Tapping (clicking) or dragging & dropping the button to the diagram area, opens an
additional
Trace Definition Dialog .
As usual, tapping (clicking) redefines the current trace while dragging & dropping cre-
ates a trace.
6.2.12.2 External DLL Configuration Dialog
In the "External DLL Configuration" dialog, you can add/remove External DLLs to/from
the firmware. If a plugin requires interaction with an external device, you can define its
address from here.
To add/remove external DLLs, the firmware has to be run as administrator.
Meas Softtool