REXROTH IndraDrive Fc FCS01, Operating Instructions Manual

Page: 130 / 238

11-42
Parameterization Rexroth IndraDrive FCS01.1
DOK-INDRV*--FCS01*****-IB01_EN-P
Parameter Setting value / description / note Device Supervisor Parameter record
P544 Actual bus value 2
S P
0 ... 21
[ 0 ]
This parameter is identical with P543
Condition is PPO 2 or PPO 4 type (P507).
P545 Actual bus value 3
S P
0 ... 21
[ 0 ]
This parameter is identical with P543
Condition is PPO 2 or PPO 4 type (P507).
P546
Function bus - Setpoint
value 1
S P
In this parameter, the supplied setpoint value 1 is assigned a function in case of bus
address.
Note:
For more details, please refer to Chapter 15, Master Communication - Field
Busses and Protocols.
0 ... 24
[ 1 ]
0 = off
1 = setpoint frequency (16 bit)
2 = torque current limit (P112)
3 = actual frequency PID
4 = frequency addition
5 = frequency subtraction
6 = current limit (P536)
7 = maximum frequency (P105)
8 = actual frequency PID limited
9 = actual frequency PID monitored
10 = torque
11 = rate-action torque (P214)
12 = reserved
13 = multiplication
14 = PI actual value process controller
15 = PI setpoint value process controller
16 = PI rate-action process controller
17 = digital in bit’s 0…0.7
18 = reserved
19 = status relay (P541)
20 = value analog output (P542)
21 = … 24 reserved
P547 Bus - setpoint 2
S P
0 ... 24
[ 0 ]
This parameter is identical with P546.
P548 Bus - setpoint 3
S P
0 ... 24
[ 0 ]
This parameter is identical with P546.