REXROTH IndraDrive Fc FCS01, Operating Instructions Manual

Page: 76 / 238

9-20
Indications and Operation of the Function Modules Rexroth IndraDrive FCS01.1
DOK-INDRV*--FCS01*****-IB01_EN-P
Indication
Failure
Cause
•
Remedy
Identification errors
220
UNKNOWN DEVICE
The device ID has not been found. The connected frequency converter is not listed in the
database of the comfort control panel; communication cannot be started.
•
Please contact your sales partner.
221
SOFTWARE VERSION
UNKNOWN
The software version of the connected frequency converter is not listed in the database of the
comfort control panel; communication cannot be started.
•
Please contact your sales partner.
222
RESERVED
223
BUS CONFIGURATION
HAS CHANGED
When the last bus configuration is restored, another device answers than the saved device.
This error can only occur when the parameter >Auto bus scan< is set to OFF, and another
device has been connected to the comfort control panel.
•
Activate the 'auto bus scan' function.
224
DEVICE IS NOT
SUPPORTED
The frequency converter type connected to the comfort control panel is not supported.
225
CONNECTION TO THE
CONVERTER IS
BLOCKED
Access to a device which is not online (previous timeout error).
•
Do a bus scan by means of parameter P1001.
incorrect operation of the comfort control panel
226
TARGET AND SOURCE
ARE DIFFERENT
DEVICES
Copying of parameter records of different FC types is generally not possible.
227
SOURCE IS EMPTY
Copying of data from a deleted (empty) memory object is not possible.
228
THIS COMBINATION IS
NOT PERMITTED
Target and source of the copy function are identical The command cannot be executed.
229
THE SELECTED
OBJECT IS EMPTY
An empty memory object cannot be loaded into the FC.
230
DIFFERENT
SOFTWARE
VERSIONS
When memory objects with different software versions are copied, problems may occur when
the parameters are transmitted.
231
INVALID PASSWORD
An attempt was made to change a parameter without a valid control panel password (P1306).