REXROTH IndraDrive Fc FCS01, Operating Instructions Manual

Page: 150 / 238

12-4
Error Messages Rexroth IndraDrive FCS01.1
DOK-INDRV*--FCS01*****-IB01_EN-P
Indication at the
standard control
panel
Group Detail in
P700 / P701
Indication at the comfort
control panel
Cause
•
Remedy
Cause
•
Remedy
10.8 Communication error
external module
Connection error / malfunction of the external module
E011 11.0 Error ADU customer
interface
Error of reference voltage of customer interface (10V /
15V) Is only indicated when control is effected through the
control terminals (P509 = 0/1).
•
Check connection of the terminals for short-circuit.
E012 12.0 Watchdog customer /
customer error
The watchdog function has been selected on a digital
input, and the impulse on the respective digital input fails
for longer than the period specified in parameter P460
>Time watchdog<.
13.0 reserved
13.1 reserved
E013
13.2 Following error break
monitoring function
"Safe stop" has been executed.
•
Torque limit (P112) has been reached.
16.0 Phase error motor No motor phase is connected.
•
Check P539
E016
16.1 Motor current monitoring
function
The required magnetizing current has not been reached.
•
Check motor connection
19.0 Parameter identification
error
E019
19.1 Incorrect star / delta wiring
of motor
Automatic identification of the connected motor has failed
•
Check motor connection
•
Check motor data (P201…P209)
20.0 reserved
20.1 Watchdog
20.2 Stack Overflow
20.3 Stack Underflow
20.4 Undefined Opcode
20.5 Protected Instruction
20.6 Illegal Word Access
20.7 Illegal Instruction Access
20.8 EPROM error
20.9 reserved
21.0 reserved
21.1 PLL error
21.2 ADU Overrun
E020
21.3 PMI Access Error
System error in program execution, triggered by EMC
errors.
•
Please refer to Chapter 8.3, Wiring Guidelines.
•
Installation of an additional external mains filter, also
refer to Chapter 13.4, Electromagnetic Compatibility
(EMC)
•
Check the frequency converter for correct grounding.