REXROTH IndraDrive Fc FCS01, Operating Instructions Manual

Page: 133 / 238

Rexroth IndraDrive FCS01.1 Parameterization
11-45
DOK-INDRV*--FCS01*****-IB01_EN-P
11.6 Information
Parameter Setting value / description / note Device Supervisor Parameter record
P700 Current error
0.0 ... 21.4 Currently pending error. For more details, see Chapter 12, Error Messages.
Standard control panel: The description of the individual error numbers
can be found under 'Error Messages'.
Comfort control panel: The errors are indicated in plain text. For more
information, see under 'Error Messages'.
P701
... - 01
...
... - 05
Last error 1…5
0.0 ... 21.4 This parameter saves the last 5 errors. For more details, see Chapter 12, Error
Messages.
With the standard control panel, the corresponding memory location 1…5 (array
parameter) must be addressed and confirmed with the ENTER key to read the stored
error code.
Note: The current error is always saved to array "-01.
0
P702
... - 01
...
... - 05
Freq. last error 1…5
S
-400.0 ... 400.0 Hz This parameter saves the output frequency that was supplied at the moment of error.
The values of the last 5 errors are saved.
With the standard control panel, the corresponding memory location 1…5 (array
parameter) must be addressed and confirmed with the ENTER key to read the stored
value.
P703
... - 01
...
... - 05
Current last error 1…5
S
0.0 ... 999.9 A This parameter saves the output current that was supplied at the moment of error.
The values of the last 5 errors are saved.
With the standard control panel, the corresponding memory location 1…5 (array
parameter) must be addressed and confirmed with the ENTER key to read the stored
value.
P704
... - 01
...
... - 05
Voltage last error 1…5
S
0 ... 500 V AC This parameter saves the output voltage that was supplied at the moment of error.
The values of the last 5 errors are saved.
With the standard control panel, the corresponding memory location 1…5 (array
parameter) must be addressed and confirmed with the ENTER key to read the stored
value.