REXROTH IndraDrive Fc FCS01, Operating Instructions Manual

Page: 115 / 238

Rexroth IndraDrive FCS01.1 Parameterization
11-27
DOK-INDRV*--FCS01*****-IB01_EN-P
Value Function Description Signal
19 Setpoint 1 on / off
20 Setpoint 2 on / off
Switching the analog input on and off 1/2 (high=ON).
The low signal sets the analog input to 0%, which does
not result in deactivation with a minimum frequency
(P104) > the absolute minimum frequency (P505). high
21 Fixed frequency 5
1)
The frequency of P433 is added to the current setpoint
value. high
22…25 reserved
26…29 Pulse functions: See the description on the next page.
30 PID controller on /
off Switching the PID controller/process controller function
on and off; high = ON high
31 Disable release
right low
32 Disable release left
Disables the >Right/left release< via a digital input or
bus address. Does not relate to the motor's actual sense
of rotation (e.g. after negativated setpoint value).
low
33…42 Pulse functions: See the description on the next page.
43…46 reserved analog
47
Increase frequency
high
48
Reduce frequency
In combination with R/L release, the output frequency
can be continuously adjusted. By activating both inputs
(higher and lower), the current value can be saved for
both in P113 for 0.5 s. With the next release with the
same direction preselection, this value is the initial
value; otherwise, start will be at f
MIN
.
high
49
reserved
50
Bit 0 fixed
frequency array
high
51
Bit 1 fixed
frequency array
high
52
Bit 2 fixed
frequency array
high
53
Bit 3 fixed
frequency array
high
54
Bit 4 fixed
frequency array
Binary-coded digital inputs for generation of fixed
frequencies. (P465)
high
55…62
reserved
1
If none of the digital inputs is programmed for right or left release, the addressing of a fixed frequency or the jog
frequency will result in release of the frequency converter. The phase sequence depends upon the sign of the
setpoint value.
2
This also applies in case of control via BUS (RS232, RS485, CANopen, DeviceNet, Profibus,)