Raritan PX3-4000 series, User Manual

Page: 96 / 688

Chapter 5: Using the PDU
75
6. Press or to select the desired option, and press .

Switch Off: Turn off the outlet.

Switch On: Turn on the outlet.

Cycle: Power cycle the outlet. The outlet is turned off and then
on.
7. A confirmation message appears. Press or to select Yes
or No, and then press .

Yes: Confirm the operation.

No: Abort the operation.
8. Verify that the selected outlet is switched on or off, depending on the
option you selected in the above step.

Check the outlet state shown on the LCD display. See step 4.

Check the outlet LED. A green LED indicates that the outlet is
turned off, and a red LED indicates that the outlet is turned on.
9. To return to the Main Menu, press several times until the Main
Menu is shown.
Peripherals
If there are no Raritan environmental sensor packages connected to your
PX, the LCD display shows the message "No managed devices" for the
"Peripherals" menu command.
If any connected sensor is highlighted in red or yellow, that sensor has
entered an alarmed, warning or critical state. See
The Yellow- or
Red-Highlighted Sensors
(on page 105) for color meanings.
If you have enabled the front panel actuator control function, you can
switch on or off a connected actuator using the LCD display. See
Enabling the Front Panel Actuator Control
(on page 295).
Control buttons that can be used and the system time are shown at the
bottom of the LCD display.
To show environmental sensor or actuator information:
1. Press or to select "Peripherals" in the Main Menu, and
press .
2. The display shows a list of environmental sensors similar to the
following diagram.