Raritan PX3-4000 series, User Manual

Page: 422 / 688

Chapter 8: Using the Command Line Interface
401
Setting the IPv6 Address
After selecting the static IP configuration mode, you can use this
command to assign a permanent IP address to the PX device.
config:# network ipv6 ipAddress <ip address>
Variables:
 <ip address> is the IP address being assigned to your PX device.
This value uses the IPv6 address format. Note that you must add
/xx
,
which indicates a prefix length of bits such as /64, to the end of this
IPv6 address.
Setting the IPv6 Gateway
After selecting the static IP configuration mode, you can use this
command to specify the gateway.
config:# network ipv6 gateway <ip address>
Variables:
 <ip address> is the IP address of the gateway. This value uses the
IPv6 address format.
Setting the IPv6 Primary DNS Server
After selecting the static IP configuration mode, use this command to
specify the primary DNS server. If you have selected the automatic
configuration mode, you still can manually specify DNS servers with this
command and then override the DHCP-assigned DNS servers. See
Overriding the IPv6 DHCP-Assigned DNS Server
(on page 402).
config:# network ipv6 primaryDNSServer <ip address>
Variables:
 <ip address> is the IP address of the primary DNS server. This value
uses the IPv6 address format.