Raritan PX3-4000 series, User Manual

Page: 506 / 688

Chapter 8: Using the Command Line Interface
485
Specifying the Asset Sensor Orientation
This command syntax specifies the orientation of the asset sensors
connected to the PX device. Usually you do not need to perform this
command unless your asset sensors do NOT come with the tilt sensor,
causing the PX unable to detect the asset sensors' orientation.
config:# assetStrip <n> assetStripOrientation <orientation>
Variables:
 <n> is the number of the FEATURE port where the selected asset
sensor is physically connected. For the PX device with only one
FEATURE port, the number is always 1.

<orientation> is one of the options:
topConnector
or
bottomConnector
.
Orientation Description
topConnector This option indicates that the asset sensor is
mounted with the RJ-45 connector located on
the top.
bottomConnector This option indicates that the asset sensor is
mounted with the RJ-45 connector located at
the bottom.
Setting LED Colors for Connected Tags
This command syntax sets the LED color for all rack units on the asset
sensor #1 to indicate the presence of a connected asset tag.
config:# assetStrip <n> LEDColorForConnectedTags <color>
Variables:
 <color> is the hexadecimal RGB value of a color in HTML format.
The <color> variable ranges from #000000 to #FFFFFF.